1.11.3 LAN Subsystem Software
LAN software and drivers are available from Intel's World Wide Web site.
For information about
Obtaining LAN software and drivers
1.12 Hardware Management Subsystem (Optional)
The hardware management features enable the boards to be compatible with the Wired for
Management (WfM) specification. The board has several hardware management features,
including the following:
•
Fan monitoring (through the I/O controller or the hardware monitoring and fan control ASIC)
•
Thermal and voltage monitoring
•
Chassis intrusion detection
For information about
The WfM specification
1.12.1 Hardware Monitoring and Fan Control ASIC
The features of the hardware monitoring and fan control ASIC include:
•
Internal ambient temperature sensor
•
Two remote thermal diode sensors for direct monitoring of processor temperature and ambient
temperature sensing
•
Power supply monitoring of five voltages (+5 V, +12 V, +3.3 VSB, +1.5 V, and +VCCP) to
detect levels above or below acceptable values
•
Thermally monitored closed-loop fan control, for all three fans, that can adjust the fan speed or
switch the fans on or off as needed
•
SMBus interface
•
Fan monitoring for all three fan connectors
1.12.2 Fan Monitoring
Fan monitoring can be implemented using Intel
software.
For information about
The functions of the fan connectors
1.12.3 Chassis Intrusion and Detection
The board supports a chassis security feature that detects if the chassis cover is removed. The
security feature uses a mechanical switch on the chassis that attaches to the chassis intrusion
connector. When the chassis cover is removed, the mechanical switch is in the closed position.
®
LANDesk Client Manager or third-party
Product Description
Refer to
Section 1.3, page 16
Refer to
Section 1.5, page 17
Refer to
Section 1.13.2.2, page 33
29