Removing the WLAN Module
1. Perform the
"Removing the Palmrest Module/Upper
page 3-19.
2. Remove the adhesive tape securing the WLAN antennas to the heatsink assembly.
Figure 3-36. WLAN Module Antenna Adhesive Tape
3. Unplug the two (2) antenna cables from the WLAN module.
Figure 3-37. WLAN Module Antennas
+
IMPORTANT:
For reference during machine reassembly, note which cable color
corresponds to the main (black) and auxiliary (white) connectors.
Machine Maintenance
Case" procedure described on
0
3-29