Boot
Use this tab to set the preferred drive sequence in which the Setup Utility attempts to boot the
operating system. By default, the computer searches for boot devices in the following order:
1. Hard disk drive
2. Optical disc drive
3. Network boot
4. External USB hard drive
5. External USB optical drive
6. External USB bootable device
Press
to select a device and press F5 or F6 to move it up or down the list.
Figure 2-8. BIOS Boot
Table 2-8. BIOS Boot
Parameter
Boot Mode
Secure Boot
System Utilities
Description
Option to specify the boot mode of the
computer.
Option to enable or disable secure boot check.
Option
UEFI or Legacy BIOS
Enabled or Disabled
2-11
0