Removing the WLAN Module
1. See "Removing the Lower Cover" on page 46.
2. Disconnect the two (2) antenna cables from the WLAN Board and remove the one (1) screw to release the
WLAN Board.
NOTE: Cable placement is Black to the TR1 terminal (left) and White to the TR2 terminal (right).
Step
WLAN Board
3. Detach and remove the WLAN Board from the WLAN socket.
50
Downloaded from
www.Manualslib.com
Size
M2.0*3
manuals search engine
Quantity
1
Screw Type
Chapter 3