Installing The Rack Nuts - HP D7171A - NetServer - LPr Installation Manual

Installation
3rd
3rd
(At Rear
Of Column)
Figure 3-1. Marking Holes For Installation
To mark the NetServer mounting holes on the front columns (refer to Figure
3-1), count up from the top of the unit below, marking the 2nd and 5th holes.

Installing the Rack Nuts

Once you have marked the holes, install one supplied rack nut in each hole
(previously marked) on all columns (see Figure 3-2). You will install eight rack
nuts in the holes marked.
8
5th
3rd
2nd
5th
3rd
2nd
Template (optional)
Unit Below
Intended Installation
Location