Chapter 3
Slide
Flange
Figure 3-4. Mounting a Slide To a Column
Installing the NetServer
1. Extend the slides until you hear a click, indicating they are fully extended
in the locked-out position. Note that the slides do not come apart (see
Figure 3-3).
WARNING
To prevent the rack from tipping over, be sure that the
stabilizing, anti-tip feature is installed on this rack enclosure
(see Figure 1-2).
2. Before you lift the NetServer, remove the power supply modules from the
rear of the NetServer to reduce the weight and improve stability.
Column
Screws
Installation
11