Using Adobe Photoshop Le - Canon PowerShot A20 Software Starter Manual

Using Adobe Photoshop LE

Installing the Software
Installing the TWAIN Driver
This program is required to load camera images into the TWAIN-compliant application
programs. For instructions, see "Installing/Uninstalling the Software" (
"Installing the USB Driver" (
Installing Adobe Photoshop LE
Place the Adobe Photoshop LE CD-ROM in the drive, double-click [My Computer] on
the Windows desktop, followed by the [Photosle] CD-ROM icon, the [English] and
[Photosle] folders, and the [Setup.exe] file. Follow the on-screen instructions to
complete the installation.
You must input the software serial number to install Adobe Photoshop LE.
It can be found on the CD-ROM case.
Starting the Software
Connecting the Camera to a USB Port
1. Connect the camera to the computer's USB port.
Refer to Where to Find Instructions for Attaching Your Camera to a
Computer (
2. Set the camera to the mode for communicating with a computer.
After a moment, an event dialog will allow you to select an application program
to start.
3. Select Adobe Photoshop LE and click [OK].
Adobe Photoshop LE will start.
4. Click the Adobe Photoshop LE [File] menu and select [Import] and
[Select TWAIN_32 Source].
5. Choose your camera model and click [Select].
6. Click the [File] menu and select [Import] and [TWAIN_32]
The TWAIN Driver will start (
p. 9).
p. ii) for connection instructions.
p. 45).
41
p. 7) or