Using Zoombrowser Ex The First Time (From Loading To Printing); Starting Zoombrowser Ex; Usb Interface - Canon PowerShot A20 Software Starter Manual

Using ZoomBrowser EX the First Time
(From Loading to Printing)
This section provides a simple explanation of the procedures for using ZoomBrowser EX
to perform each of the steps from loading to printing. Please refer to the ZoomBrowser
EX Help file for more details.
Some camera models do not support all of the connection interfaces. Please
check the Camera and Software Compatibility chart to confirm your camera's
compatibility. (
What to Do if the "Caution! Connection Time" Dialog Displays
• If a set period of time passes without a camera function being accessed when the
camera is connected via the USB interface, a message on the computer display will
ask if you wish to remain connected. If you do not access a function, the camera will
close the connection after an additional minute passes. (The power will remain on
and no message will appear if the camera is powered by a household power source
or its auto power off function is set to Off (excluding PowerShot S10/S20 models)).
• To reopen the connection, press the camera's shutter button or main switch. Please
see the Camera User Guide for details.

Starting ZoomBrowser EX

USB Interface

1. Attach the camera to the computer with the USB cable.
Refer to Where to Find Instructions for Attaching Your Camera to a
Computer (
2. Set the camera to the mode for communicating with a computer.
After a moment, an event dialog will allow you to select an application program
to start.
3. Select [Canon ZoomBrowser EX] and click the [OK] button.
Your camera model name
will appear here.
ZoomBrowser EX will start and display the camera's images as small thumbnail
images in the ZoomBrowser EX Camera Window. (
Quick Tips will automatically display. Read these tips to quickly again an
understand of the operating procedures.
p. 5)
p. ii) for connection instructions.
p. 14)
11