Hp Autopilot Client Software Required - HP D6030A - NetServer - E50 Installation Manual

1 Introducing HP NetServer AutoPilot

HP AutoPilot Client Software Required

Minimum software requirements for proper operation of HP AutoPilot are as follows.
Microsoft Windows software:
Windows for Workgroups 3.1, or 3.11, running in enhanced mode. If you plan
on managing Novell NetWare servers, your Windows for Workgroups HP
AutoPilot Client must be configured for NetWare network access. Run
Network Setup from the Network group in the Windows Program Manager to
verify or change your Windows network configuration.
Windows NT Workstation 3.51 (for HP AutoPilot's NetWare features to work
properly with the Windows NT NetWare Client Services, you must replace
Microsoft's NETWARE.DRV file with the copy included in the NET33X.EXE
update supplied by Novell Corporation through CompuServe or the World
Wide Web)
Windows 95
Network operating system Client software (one or both of the following):
Novell NetWare NETX shell v3.26 or VLM client v1.1 with either IPX.COM
v3.10 or IPXODI.COM v2.10 protocol drivers for IPX support
TCP/IP stack that includes a Windows Sockets stack and WinSNMP, which
provides for the coexistence of multiple SNMP applications
NOTE For HP AutoPilot Clients running Windows for Workgroups, Hewlett-
Packard recommends either the use of Microsoft's TCP/IP software or the
purchase of FTP's PC/TCP product.
12