PRESONUS StudioLive 16.0.2 Owner's Manual page 50

5.2 Scenes
46
EQ and Dyn: All Fat Channel dynamics processing, filter
parameters, and pan position for every channel and bus.
Aux Mix: All aux mixes parameters including:
• Channel sends to aux mixes
• Channel sends to FXA and FXB
• Pre1/Pre2 position for each aux and FX bus
Faders: All fader positions.
GEQ: Graphic EQ settings for the stereo graphic equalizer.
Pots: All digital knob positions:
• FXA and FXB levels
• Solo bus level
• Phones level
• Monitor level
Power User Tip: If you enable knob positions (recalling group "pots") as a part of your
Scene recall, all of the digital knobs (FXA and FXB Levels, Solo Bus, Phones, Monitor) will
remain at their stored position until they are moved manually. Once a knob is turned, its
value will jump to the value of its current physical position. Therefore, if you intend to save
a Scene and recall the "pots" group later, it is highly recommended that you use the recall
sheet provided in the back of this manual to note the stored position of these controls.
It is important to note that the recall groups have no effect on which
parameters are stored with a Scene. All storable parameters are saved
with a Scene regardless of which recall groups are enabled.