Assembly - Horizon Fitness HORIZON EX-57 User Manual

CONSOLE
GRIP PULSE
WATER BOTTLE HOLDER
CONSOLE MAST
TOP COVER
PIVOTING FOOT PAD
PEDAL ARM
WHEEL COVER
REAR STABILIZER END CAP
TOOLS INCLUDED
5mm Allen Wrench
c
6mm Allen Wrench
c
Phillips Screw Driver
c
13/15mm Flat Wrench
c
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com

EX-57_Rev.1.3.indd 6-7
REAR STABILIZER END CAP
PARTS INCLUDED
1 Console 1 HORIZON FITNESS
c c
1 Console Mast 12-Volt Power Adapter
c
1 Front Stabilizer Tube 4 Hardware Bags
c c
2 Upper Handlebars 2 Elbow Cover Sets
c c
2 Lower Handlebars 2 Handle Bar Cover Sets
c c
2 Lower Link Arms 1 Water Bottle Holder
c c
2 Top Covers 1 Console Mast Boot
c c
2 Rear Stabilizer End Caps
c
ASSEMBLY STEP 1
HARDWARE BAG FOR STEP 1 CONTENTS :
UPPER HANDLEBAR
BOLT (A)
20 mm
Qty: 2
HANDLE BAR COVER
MAIN FRAME
LOWER HANDLEBAR
LOWER LINK ARM
ELBOW COVER
END CAP
REAR STABILIZER
A) Open HARDWARE BAG FOR STEP 1.
B) Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2
FLAT WASHERS (C).
C) Fit both END CAPS into REAR STABILIZER TUBE.
ADJUSTING LEVELERS
Adjust the 2 rear levelers and 2 front levelers so that the elliptical is level on the floor.
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)
SPRING WASHER (B) FLAT WASHER (C)
18 mm 20 mm
Qty: 2 Qty: 2
MAIN FRAME
FRONT STABILIZER TUBE
BOLT (A)
SPRING WASHER (B)
END CAP
FLAT WASHER (C)
ADJUST HEIGHT
LOCK ADJUSTMENT
7
6/25/08 10:40:30 AM