Converting Wyse R Class To Thinos; Requirements - Wyse R50L Installation Manual

2

Converting Wyse R Class to ThinOS

This chapter includes the requirements and procedures you need to install and use Wyse
USB Firmware Tool

Requirements

•
•
TM
to update your thin client to ThinOS firmware.
Tip
The purpose of the Wyse USB Firmware Tool is to configure a bootable USB
key for device firmware. In the following procedures, you will create a
configured USB key containing the firmware contents that you need, and
then boot from this configured USB key on appropriate product and flash size
devices to push the contents of the USB key onto these target devices.
Windows XP Professional SP3, Windows 2003 Server, Windows 7 Enterprise (32-bit),
or Windows 7 Ultimate (64-bit)
USB key size should be 4 GB or larger (up to 16 GB tested—see "USB Keys -
Troubleshooting Boot Issues")
Caution
During the USB key configuration process the USB key will be reformatted.
®