Brocade Communications Systems SN3000B Command Reference Manual page 612

Brocade fabric os command reference - supporting fabric os v7.0.1 (53-1002447-01, march 2012)
Hide thumbs Also See for SN3000B:
Table of Contents

Advertisement

22
perfTTmon
Fabric Mode Top Talker commands:
--add fabricmode
--show
--delete fabricmode
--help
EXAMPLES
To add an F_Port Top Talker to blade 1 port 2 (which should be an F_Port):
To delete the F_Port Top Talker:
To add the Fabric Mode Top Talker:
To delete the Fabric Mode Top Talker:
To display the Fabric Mode Top Talker output:
586
Installs the Top Talker monitor on all switches in the fabric. When a new switch
joins the fabric, this command must be run again on the switch. The TT
configuration information is not propagated automatically to the new switch. In a
mixed chassis configuration containing both 8G and 16G port blades, fabric mode
is blocked when FCR is enabled. Port-level Top Talkers will be allowed on 16G
blades but not on 8G blades when FCR is enabled. When you insert an 8G port
blade into a chassis with fabric mode and FCR enabled, the blade is faulted. Use
the fosConfig command to disable FCR or disable the fabric mode Top Talker.
Displays the Top Talking flows on the switch for a given domain ID.
dom dom_id
Specifies the domain ID for the flow display.
number of top talking flows
Specifies "n" Top Talking flows. Valid values are between 1 and 32. If a value
greater than 32 is entered, Top Talker displays counters for only 32 flows and a
warning message. This operand is optional; if omitted, the command displays the
top 8 flows.
wwn | pid
Specifies display as either WWN or PID format. This operand is optional; if
omitted, the command displays in WWN format.
Deletes the Fabric Mode Top Talker.
Displays the command usage.
Switch:admin> perfttmon --add ingress 1/2
switch:admin> perfttmon --del
Switch:admin> perfttmon --add fabricmode
Switch:admin> perfttmon --del fabricmode
Switch:admin> perfttmon --show dom 1 pid
=========================================================
Src_PID
Dst_PID
=========================================================
0x03f600
0x011300
0x03f600
0x011300
1/2
MB/sec
Potential E-Ports
121.748
2/0,2/2,2/3
121.748
3/14,3/15
Fabric OS Command Reference
53-1001764-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.1

Table of Contents