Brocade Communications Systems SN3000B Command Reference Manual page 1098

22
zone
To prune all the zone members that are not enforceable:
2. Traffic isolation zone commands
To create an activated traffic isolation zone with failover enabled (default).
To create a deactivated traffic isolation zone with failover disabled:.
To add an E_Port and N_Port member as a portlist to an existing TI zone:
To add the option to disable failover for a TI zone:
To add the option to enable failover for a TI zone:
To remove portlist members from an existing TI zone.
To activate the TI zone "bluezone":
To deactivate the TI zone "purplezone":
To delete the TI zone "bluezone":
To display all TI zones in the defined configuration:
1072
switch:admin> zone --validate -f
You are about to prune the zone configurations,
based on zone --validate output.
Do you want to prune the zone
configurations (yes, y, no, n): [no] y
switch:admin> zone --create -t ti purplezone
-p "1,1; 2,4; 1,8; 2,6"
switch:admin> zone --create -t ti -o dn purplezone
-p "1,1; 2,4; 1,8; 2,6"
switch:admin> zone --add purplezone
-p "3,4; 3,6"
switch:admin> zone --add -o n purplezone
switch:admin> zone --add -o f greenzone" -p "3,4"
switch:admin> zone --remove bluezone -p "3,4; 3,6"
switch:admin> zone --activate bluezone
switch:admin> zone --deactivate purplezone
switch:admin> zone --delete bluezone
switch:admin> zone --show
Defined TI zone configuration:
TI Zone Name: ti_blue
Port List: 4,55; 10:00:00:00:00:01:00:01; \
10:00:00:00:00:01:00:04; 3,9
Configured Status: Activated / Failover-Disabled
Enabled Status: Deactivated
\
\
\
Fabric OS Command Reference
53-1001764-01