Brocade Communications Systems SN3000B Command Reference Manual page 1114

3
Primary FCS commands
TABLE 6
Command
msTdDisable
msTdEnable
secPolicyAbort
secPolicyActivate
secPolicyAdd
secPolicyCreate
secPolicyDelete
secPolicyDump
secPolicyFCSMove
secPolicyRemove
secPolicySave
secPolicyShow
snmpConfig
tsClockServer
zoneAdd
zoneCreate
zoneDelete
zoneObjectCopy
zoneObjectExpung
zoneObjectRename
zoneRemove
1088
Primary FCS commands (Continued)
Description
msTdDisable "ALL" must be run from the primary FCS switch.
msTdEnable "ALL" must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Can be run on all FCS switches.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Can be run on all FCS switches.
Can be run on all FCS switches.
Can be run on all switches to view the NTP server's IP address. You can only modify
the NTP server's IP address on the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Must be run from the primary FCS switch.
Fabric OS Command Reference
53-1002447-01