Port Configuration; Displaying Port Information; Port Configuration Parameters - HP StorageWorks SN6000 Command Line Interface Manual

5

Port Configuration

This section contains port configuration information.

Displaying port information

You can display the following port information:
• Port configuration
• Port operational
• Port threshold alarm configuration
• Port performance, page 60
• Transceiver

Port configuration parameters

To display the port configuration parameters, enter the show config port command. These
parameters determine the operational characteristics of the port. See
parameters.
SN6000 FC Switch #> show config port 3
Configuration Name: default
-----------------------------
Port Number: 3
------------
AdminState
LinkSpeed
PortType
SymbolicName
ALFairness
DeviceScanEnabled
ForceOfflineRSCN
ARB_FF
InteropCredit
ExtCredit
FANEnabled
AutoPerfTuning
MSEnabled
NoClose
IOStreamGuard
PDISCPingEnabled
parameters, page 57
information, page 58
parameters, page 59
information, page 60
Online
Auto
GL
Port3
False
True
False
False
0
0
True
True
True
False
Auto
True
HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide
Table 33 for descriptions of these
57