Network Configuration; Displaying The Network Configuration - HP StorageWorks SN6000 Command Line Interface Manual

3

Network Configuration

Network configuration consists of the IP parameters that identify the switch in the network and provide for
IP security. This section describes the network configuration tasks.

Displaying the network configuration

The show fabric command displays IP addresses (Enet IP Addr) for all switches in the fabric, as
shown in the following example.
SN6000 FC Switch #> show fabric
Domain
WWN
SymbolicName
HostName
EthIPv4Address
EthIPv6Address
* indicates principal switch
The show setup system command displays the entire switch network configuration, which includes the
following:
• IP configurations (versions 4 and 6)
• DNS server configuration
To display specific information, add the corresponding keyword. For example, to display IPv6
configuration information, enter the show setup system ipv6 command:
SN6000 FC Switch #> show setup system ipv6
System Information
------------------
EthIPv6NetworkEnable
EthIPv6NetworkDiscovery
EthIPv6NetworkAddress
EthIPv6GatewayAddress
*133(0x85)
10:00:00:c0:dd:0d:53:91
SN6000 FC Switch
<undefined>
10.20.116.133
<undefined>
False
Static
2001::1/64
fe80::1
HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 21