Restore Dialog Boxes-Full And Selective - HP StorageWorks SN6000 User Manual

Figure 37 Restore dialog boxes—full and selective
The switch being restored should be physically disconnected from the fabric. Restoring a
CAUTION:
switch in a fabric can severely disrupt the fabric. After the restore process is complete, the switch can be
reconnected to the fabric.
To restore a switch:
1. Log in to the fabric through the switch you want to restore. You cannot restore a switch over an ISL.
2. Open the Switch menu and select Restore to display the Restore dialog box
dialog box offers a Full Restore tab and a Selective Restore tab.
3. Enter a name for the file to be archived or click Browse and search for a file name.
This archive file must be one that was produced by the QuickTools Archive function. Configuration
backup files created with the Config Backup command are not compatible with the QuickTools Restore
function. The Config Backup command does not archive the primary or secondary secrets for any
security groups.
4. To restore all configuration settings, click the Full Restore tab, then click Restore. To restore selected
configuration settings, click the Selective Restore tab, select one or more of the following options, and
then click Restore.
• Network Properties—Restores all settings presented in the Network properties dialog box except the
IP address. See "Network
• IP Address—Restores switch IP address in addition to the other network properties.
• Port Properties—Restores all settings presented in the Port Properties dialog box. See
name" (page 98).
• Switch Properties—Restores all settings presented in the Switch properties dialog box except the
domain ID. See "Switch
• Domain ID—Restores switch domain ID in addition to the other switch properties.
• Configured Zoning—Restores all configured zone sets, zones, and aliases in the switch's zoning
database, excluding the active zone set.
• Nicknames—Restores the last saved nickname configuration.
• Call Home—Restores all Call Home configuration and profile settings.
HP StorageWorks SN6000 Fibre Channel Switch QuickTools Switch Management User Guide
properties" (page 65).
properties" (page 60).
(Figure 37). The Restore
"Port symbolic
75