HP StorageWorks SN6000 User Manual page 51

Table 8 Switch data window fields (Continued)
Field
Zones/Security Group
Interop Mode
Legacy Address Format
Merge Auto Save
Default Zone
Discard Inactive
Implicit Hard Zoning
Security Auto Save
Security Fabric Binding
Enabled
Advanced Group
R_A_TOV
E_D_TOV
Number of Donor Groups
Inactivity Timeout
Interop Mode
Legacy Address Format
In-band Enabled
Principal Switch
HP StorageWorks SN6000 Fibre Channel Switch QuickTools Switch Management User Guide
Description
Standard
None
If Enabled, any zoning updates from the fabric will be saved
in permanent (non-volatile) memory as well as temporary
memory. If Disabled, any zoning updates from the fabric will
be saved only in temporary memory and will be lost after a
switch reset.
Enables or disables communication between ports and
devices not defined in the active zone set, or when there is
no active zone set.
Automatically removes the previously active zone set when a
zone set is activated on a switch.
Introduces hardware enforcement of zoning regardless of
type. All zones and all supported zone member types will
have hardware enforcement.
Enable to automatically save security settings to permanent
memory on the switch.
If Enabled, the expected domain ID of a switch is required
before the switch can be attached to the fabric.
Resource allocation timeout value (in milliseconds)
Error detect timeout value (in milliseconds)
Total number of donor port groups. A donor group is a set
of ports on a switch that can donate buffer credits to one
another.
Number of minutes the switch waits before terminating an
idle command line interface session. Zero (0) disables the
time out threshold.
Standard
None
In-band management status. Permits (True) or prevents
(False) a switch from being managed over an ISL.
If there is a domain ID conflict in the fabric, the switch with
the highest principal priority, or the principal switch, will
reassign any domain ID conflicts and establish the fabric.
51