Cr_Progv Command; Cr_Image Command; Cr_Imggmd Command - Sanyo PLC-ZM5000L - 5000 Lumens Manual

PLC-ZM5000/ZM5000L Expand Serial Command Functional Specifications

9.4.16 CR_PROGV Command

Command "CR_PROGV" [CR]
Details Get Progressive scan setting status
Acceptable
Response
%1
Unacceptable

9.4.17 CR_IMAGE Command

Command "CR_IMAGE" [CR]
Details Get image setting status
Acceptable
%1
Response
Unacceptable

9.4.18 CR_IMGGMD Command

Command "CR_IMGGMD" [CR]
Details Get setting status of Standard/Real/Cinema in Image Gamma
Acceptable
Response
%1
Unacceptable
"000_%1" [CR]
"ON" ------------------------------ Set Progressive scan On
"FILM" ----------------------------- Select FILM mode
"OFF" ------------------------------ Set Progressive scan Off
"Error Code" [CR]
"000_%1" [CR]
"DYNAMIC" -------------------------------- Dynamic
"STAND" ------------------------------------ Standard
"REAL" ------------------------------------ Real
"NATURAL" -------------------------------- Natural
"CINEMA" ---------------------------------- Cinema
"CUSTOM1" ------------------------------- "Image1"
"CUSTOM2" ------------------------------- "Image2"
"CUSTOM3" ------------------------------- "Image3"
"CUSTOM4" ------------------------------- "Image4"
"CUSTOM5" ------------------------------- "Image5"
"CUSTOM6" ------------------------------- "Image6"
"CUSTOM7" ------------------------------- "Image7"
"CUSTOM8" ------------------------------- "Image8"
"CUSTOM9" ------------------------------- "Image9"
"CUSTOM10" ----------------------------- "Image10"
"Error Code" [CR] -------- When the command is invalid due to
condition such as Input source.
"?" [CR] ----------------------- When unknown command is received
"000_%1" [CR]
"DYN" -------------------------------- Dynamic
"STD" -------------------------------- Standard
"REL" -------------------------------- Real
"NTR" -------------------------------- Natural
"CNM" ------------------------------- Cinema
"Error Code" [CR]
59/89