Chapter 3: Configuring Your System And Network; The Configuration Tab - HP NetStorage 6000 User Manual

Configuring Your System and Network

The Configuration Tab

Configuring Your System and Network
The Configuration Tab
3-1
When you initially set up your HP NetStorage 6000, you must:
n
Enter your TCP/IP settings.
n
Configure your Network Interface Card parameters.
n
Set up your UNIX and/or Windows environments.
If your network configuration changes, you need to alter these settings.
The Configuration tab lets you access:
n
Network settings — TCP/IP, Windows and UNIX settings that allow
the NetStorage 6000 to connect with your network and work in
Windows, UNIX or both operating systems.
n
Alert settings — Optional settings you can enter if you want to receive
e-mail or server notification in case of a hardware failure or system
alerts. You also can specify a remote server to which you can redirect a
copy of the event log.
n
System settings — Optional informational settings. You can specify the
date and time as well as password-protect the administration of your
NetStorage web interface.
n
User mapping — Configuration and management tools for operating
the HP NetStorage 6000 in a heterogeneous environment with user-
level security for NT clients.
n
Shutdown/Restart — You can shut down or restart the HP NetStorage
device from the Configuration tab.
Chapter 3