Features - HP NetStorage 6000 User Manual

System Specifications

Features

Features
C-5
Feature
Self-restart
Capability
Environmental
Monitoring
Self-Correcting
Memory
Hot-Swap
Subsystem
RAID Disk Array
Controller
Power Supply
Modules
Fans
Boot Time
UPS Support
Automatic Server Restart (ASR) that reboots incase
of embedded NOS hang
Temperature, voltage, and fan-speed monitoring with
alarm capability
ECC capable with hardware error scrubbing; corrects
single bit errors, detects multiple bit errors
•
Supports 36GB and future low profile and half height
SCSI hard disks
•
Up to 10 hard disks
• Hardware RAID accelerator with 32MB of NVRAM
•
RAID5
•
Supports up to 10 hard disks with hot swap
•
Maximum RAID5 group of 8 drives
•
32MB NVRAM for cached write protection
•
Support for SMART capable disk drives
•
Automatic detection of hard disk failure with
automatic rebuild to global hot spare
•
Triple, redundant with hot swap
• System can tolerate failure of one supply (two
required for minimum operation) (2+1 operation)
•
Audible alarm and network alarm for failure
•
2 Redundant fan assemblies with fan-speed
monitoring for system cooling
• Fan hot swap supported
Seconds from power on to file system available (after
proper shutdown, one 5 drive RAID5 partition, typical)
• External Uninterruptible Power Supply (UPS)
monitoring through integrated serial port (DB9 male)
•
System shutdown initiated battery critical error
reported by UPS
• Requires Sine-wave output
•
Support for the following APC Brand UPS:
•
APC Smart-UPS 700 Model APC SU700RMNET
Description