Problems - Oki OKIPAGE8c Manuallines

WASTE TNR
NR FULL
The waste toner box is almost full. Be prepared to
replace it when the WASTE TONER FULL message
appears.
WASTE TONER FULL
The waste toner box is full. For replacement instructions,
see "Printer Maintenance" or refer to the online User's
Guide
FUSER LIFE
The fuser needs to be replaced. For replacement instruc-
tions, see "Printer Maintenance" or refer to the online
User's Guide.
BELT LIFE
The transfer belt needs to be replaced. For replacement
instructions, see "Printer Maintenance" or refer to the
online User's Guide..

Problems

HOPPING ERROR
Paper being fed from the paper tray has jammed. For
clearing instructions, see "Clearing Paper Input Jams."
ERROR PAPER SIZE
CHECK [tray]
The paper size detected by the printer in the tray indi-
cated is incorrect for the current print job. Make sure the
size of the paper in the tray matches the size your
software calls for.
TRAY 1 INSTALL
The printer is trying to automatically switch to the
second paper tray when Tray 1 paper ran out. Do not
remove Tray 1 until the automatic switching process is
complete.
ERROR MEMORY
OVERFLOW
The current page is too complex and cannot be printed.
Try simplifying the page or reducing the resolution to
300 dpi. If this happens often, consider adding memory
to the printer. See the online User's Guide for details on
memory upgrade options.
ERROR RECEIVE
BUFFER OVERFLOW
The transfer of data from the computer to the printer is
not properly coordinated. Check the printer cable and
printer interface menu settings. Adding optional memory
can also help the problem. See the online User's Guide
for details on memory upgrade options.
TNR SNS [color]
Make sure the indicated image drum is installed. If it is,
lift it out and check the black lever on the right side
(facing the printer) of the metal rod below the image
drum—make sure there is no paper blocking it and that it
moves freely.
31