Storage Configuration - ASROCK Z68 Extreme4 Gen3 User Manual

ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Enabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows

3.4.4 Storage Configuration

Marvell SATA3 Operation Mode
This item is for SATA3_M1 and SATA3_M2 ports. Use this to select Mar-
vell SATA3 operation mode. Configuration options: [IDE Mode], [AHCI
Mode] and [Disabled]. The default value is [IDE Mode].
Marvell SATA3 Bootable
Use this to enable or disable Onboard Marvell SATA3 Option ROM. If
Option ROM is disabled, UEFI cannot use the SATA device to connect to
Marvell SATA3 controller as Boot Device.
We recommend to use Intel
SATA3_1, SATA2_2, SATA2_3, SATA2_4 and SATA2_5) for
your bootable devices. This will minimum your boot time and
get the best performance. But if you still want to boot from
Marvell SATA3 controller, you can still enable this in UEFI.
SATA Mode
This item is for SATA3_0, SATA3_1 and SATA2_2 to SATA2_5 ports.
Use this to select SATA mode. Con guration options: [IDE Mode], [AHCI
Mode], [RAID Mode] and [Disabled]. The default value is [IDE Mode].
AHCI (Advanced Host Controller Interface) supports NCQ
and other new features that will improve SATA disk perfor-
mance but IDE mode does not have these advantages.
® TM
Vista certi cation.
®
Z68 SATA ports (SATA3_0,
71