Installing Windows ® 7 / 7 64-Bit / Vista; Tm Tm; Xp / Xp 64-Bit Without Raid Functions; Installing Windows Xp / Xp 64-Bit Without Raid Functions - ASROCK Z68 Extreme4 Gen3 User Manual

2.22 Installing Windows
/ XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATAII / SATA3 HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.22.1 Installing Windows
Functions
If you want to install Windows
HDDs without RAID functions, please follow below steps.
Using SATA / SATAII / SATA3 HDDs with NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [AHCI]. (For SATA3_0, SATA3_1 and SATA2_2 to
SATA2_5 ports.)
Set the option "Marvell SATA3 Operation Mode" to [AHCI]. (For SATA3_M1 and
SATA3_M2 ports.)
STEP 2: Make a SATA / SATAII / SATA3 driver diskette.
Please make a SATA / SATAII / SATA3 driver diskette by following section 2.21.1
step 2 on page 53.
®
STEP 3: Install Windows
After making a SATA / SATAII / SATA3 driver diskette, you can start to install Win-
®
dows XP / XP 64-bit on your system. At the beginning of Windows
F6 to install a third-party AHCI driver. When prompted, insert the SATA / SATAII /
SATA3 driver diskette containing the Intel
the driver will be presented. Select the driver to install according to the mode you
choose and the OS you install.
Using SATA / SATAII / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE]. (For SATA3_0, SATA3_1 and SATA2_2 to
SATA2_5 ports.)
Set the option "Marvell SATA3 Operation Mode" to [IDE]. (For SATA3_M1 and
SATA3_M2 ports.)
®
STEP 2: Install Windows
7 / 7 64-bit / Vista
®
® TM
7 / 7 64-bit / Vista / Vista
XP / XP 64-bit Without RAID
®
®
XP / XP 64-bit OS on your SATA / SATAII / SATA3
Advanced screen
XP / XP 64-bit OS on your system.
®
AHCI driver. After reading the oppy disk,
Advanced screen
XP / XP 64-bit OS on your system.
57
TM TM
/ Vista 64-bit / XP
TM
64-bit / XP / XP 64-
SATA Con guration.
®
setup, press
SATA Con guration.