Usb Connection - Windows 98, Me - Oki OKIPAGE14e Setup Manual

USB Connection - Windows 98, Me

Turn on your computer and wait for it to boot up.
G
G Turn on your printer.
G Add New Hardware Wizard appears. Click Next.
Insert the OKIPAGE 14e CD into your CD-ROM drive.
G
G Select "Search for the best driver for your device
(Recommended)." Click Next.
G Select "CD-ROM drive." Clear other choices. Click Next.
G The OKI USB Device driver is located. Click Next.
The files are copied. Select Finish.
G
G The printer is detected and the Add New Hardware Wizard
appears. Click Cancel.
!
To fully install all the necessary software, use the
following install procedures with the OKIPAGE 14e
CD.
Install the Printer Driver and Status
Monitor
With the CD in your CD-ROM drive:
Click Start Run.
G
Browse to your CD-ROM drive and double-click
G
INSTALL.EXE in the root directory. Click OK.
G The OKI Menu Installer appears. Select a language.
G Click the button beside Printer Software and follow the
on-screen instructions, selecting the LPT1 port. You can
change your port selection once the installation is
completed.
!
You can click a button on the Menu Installer to:
• View Help Support and Information
• Register your printer online
• Select a different language
G Click Finish. Exit the Menu Installer.
Select the USB printer port:
From the Windows Taskbar, click Start
G
Printers. Right-click the OKIPAGE 14e icon, then click
Properties\Details.
Settings
|
14e Setup Guide E-19