Cannot Select The Projector - Epson PowerLite Pro Z8250NL Operation Manual

Solving Problems
Check
Are the access point and the projector's subnet different? Select Manual search from EasyMP Multi PC Projection, and then specify the IP address to connect.
Does the projector support the EasyMP Multi PC
Projection version being used?
Do you have the latest version of EasyMP Multi PC
Projection?

Cannot select the projector

Check
Are you trying to combine a set of projectors that differs
from a combination created by a user who is already
connected?
s "Manual search" p.18
Install EasyMP Multi PC Projection from the EPSON Projector Software for Meeting & Presentation
CD-ROM supplied with the projector.
Only 16 computers can be connected under either of the following conditions.
• When any of the computers is running an older version (Ver. 1.05 or older) of EasyMP Multi PC
Projection.
Install the latest version of EasyMP Multi PC Projection on all computers when connecting 17 to 32
computers.
You can check the EasyMP Multi PC Projection version from Set options.
s "Adjust Performance Tab" p.44
• When any of the connected projectors can only connect up to 16 computers.
When another user is already connected, you can only connect to the projectors in the combination
selected by the other user. Select a projector from the same combination as the user who is already
connected, or select a projector that is in standby status.
Remedy
Remedy
35