Troubleshooting; Cannot Connect To The Projector You Want To Use; Cannot Connect The Projector And The Computer Via Wireless Lan - Epson EasyMP Network Projection Operation Manual

Troubleshooting

Cannot connect to the projector you want to use.

Cannot connect the projector and the computer via wireless LAN.

Check
Is the Wireless LAN unit connected?
Is the SSID the same as that of the access point?
(For Quick Connection Mode)
Is the DHCP function for Wired LAN turned On?
(For Quick Connection Mode)
Is the computer's wireless LAN function working?
Is the wireless LAN setting enabled when the computer is in power
save mode?
Are there any obstacles between the access point and the computer
or projector?
Is the computer's wireless LAN radio strength set to low?
Does the wireless LAN system meet the supported specifications? Check the wireless LAN system. See the following manual for details on the projector's wireless LAN system.
Is the Wireless LAN Power set to Off in the projector's
Configuration menu?
Is the AirPort setting for Mac OS X correct?
Is the same WEP key set?
Check that the Wireless LAN unit is securely connected.
Set an SSID that is different from that of the access point.
You can make the SSID setting from the projector's Network menu.
See the following manual for details.
User's Guide
s
Set the DHCP setting to Off from Wired LAN in the Configuration menu.
See the following manual for details.
User's Guide
s
Check that the wireless LAN adaptor or wireless LAN card is installed on the computer.
Enable the wireless LAN.
Sometimes the indoor environment prevents the projector from being found in a search. Check for any obstacles
between the access point and the computer or projector, and change their position to improve communication.
Set the radio strength to maximum.
User's Guide
s
Set Wireless LAN Power to On in the Wireless LAN menu from the Configuration menu.
See the following manual for details on the projector's wireless LAN settings.
User's Guide
s
Check that AirPort is set to on. Or, check whether an appropriate access point has been selected.
When selecting WEP from Security, set the access point, the computer, and the projector to the same WEP key.
See the following manual for details on the WEP key.
User's Guide
s
Remedy
42