When A Connection Is Made Using Easymp Network Projection, The Projected Image Remains As It Is, And A Connection Cannot Be Made From Another Computer; Cannot Select Or Change The Connection Mode; The Screen Is Not Projected; The Slide Show Cannot Be Displayed On The Desired Display When The Multi-Screen Display Function Is Being Executed - Epson PowerLite 1760W Operation Manual

Troubleshooting
When a connection is made using EasyMP Network Projection, the projected image remains as it is, and a connection
cannot be made from another computer.
Check
Did the presenter leave the conference room without
cutting off the network connection?

Cannot select or change the connection mode.

Check
Is EasyMP Network Projection set to start up using the
same connection mode?

The screen is not projected.

The Slide Show cannot be displayed on the desired display when the multi-screen display function is being executed.

Check
Are you using PowerPoint 2002 or an earlier version?
(For Windows)
With EasyMP Network Projection, the computer currently connected can be disconnected when
another computer tries to connect to the projector.
Therefore, when a Projector Keyword is not set for the projector, or if you know the Projector
Keyword, you can disconnect the computer currently connected and then connect your computer to
the projector.
When a Projector Keyword is set for the projector and you do not know the Projector Keyword, restart
the projector and reconnect.
Select Display Connection Mode Selection window on startup on the General settings tab from
Set options. The projector selection screen is displayed after restarting EasyMP Network Projection.
To set and use two or more virtual displays
virtual displays to one before displaying the Slide Show.
Remedy
Remedy
Remedy
g
, use PowerPoint 2003 or later, or limit the number of
42