Error Messages When Searching For And Selecting Projectors - Epson PowerLite Pro Z8250NL Operation Manual

Error Message List
Error Messages
Cannot start from the shortcut while the Option screen is
displayed. Close the Option screen, and then try opening
the shortcut again.
The slide show may will not begin until PowerPoint is
restarted.

Error Messages when Searching for and Selecting Projectors

Error Messages
Cannot join. The maximum number of participants has
been exceeded.
The keyword does not match. Re-enter the keyword
displayed on the projector screen.
Connection failed due to keyword mismatch.
Updating display configuration. Please try again in a few
minutes. Select another projector.
One or more projectors are not responding.
A network error occurred.
Connection to the projector failed.
The Option screen is displayed. Close the Option screen.
Close PowerPoint, and then start again.
32 computers are already connected to the projector. Disconnect users and projectors that are not
projecting screens.
s "Ending the Meeting" p.25
Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword.
If a user is already connected, check the Projector Keyword with the connected user.
Reconnect to the projector. Enter the Projector Keyword on the keyword entry screen displayed when
you connect.
Check the Projector Keyword that is displayed on the projector's LAN standby screen. If a user is
already connected, check the Projector Keyword with the connected user.
When another user is already connected, you can only connect to the projectors in the combination
selected by the other user. Select a projector from the same combination as the user who is already
connected, or select a projector that is in standby status.
You cannot connect to multiple projectors simultaneously. Check the network settings on the
computer and the network settings on the projector.
Try connecting again. If it still does not connect, check the network settings on the computer and the
network settings for the projector.
Cannot connect to a projector that is already connected using EasyMP Network Projection. Check if
the projector you want to connect to is already connected to EasyMP Network Projection.
Remedy
Remedy
39