Head Check Setting Mode; Dip Switch Settings - Oki LP470s Manual Rapide

Head check setting mode

In the head check setting mode, a check can be performed in two checking areas: the
printing area and the barcode printing area .
The presence of the head check function and the head check range settings are set by
the DIP switch (DSW) settings when the power is turned on, by button pressing status,
and by the cover status .

DIP switch settings

DSW-1
(A) OFF
(B) ON
DSW
Button and cover status
settings
(A) PRINT button + cover
open
FEED button + cover open
(B) PRINT button + cover
open
FEED button + cover open
DSW settings (A/B) + cover open + PRINT/FEED button + POWER
Setting head check function
(STATUS LED flashes green)
(STATUS LED lights green)
Note: W hen the buzzer sound mode is enabled, the buzzer sounds upon startup.
Release the PRINT/FEED button to stop the buzzer. To check the settings for
head check setting mode, see the test print output (See p. 18).
To end head check setting, confirm that the STATUS LED is on in green, then turn
power off. After changing the head check setting mode, be sure to restore the
DSW to their original settings.
DSW-2
ON
OFF
Setting completes
DSW-3 DSW-4
OFF ON
OFF ON
Function
Head check range set as
printing area
Head check function set as
disabled
Head check range set as
barcode printing area only
Head check function set as
disabled
Default
Head check
range set as
printing area
31