Installation Et Retrait Du Bloc-Pile - Oki LP470s Manual Rapide

Installing and Removing the Battery Pack
Installing and Removing the Battery Pack

Installation et retrait du bloc-pile

Installing and Removing the Battery Pack
1
Open the battery cover.
1
Open the battery cover.
O uvrez le capot du bloc-pile.
Tout en appuyez sur le levier gris,
2
While pressing the gray hook,
2
While pressing the gray hook,
insérez le bloc-pile, puis fermez le
insert the battery pack, then
insert the battery pack, then
capot du bloc-pile .
close the battery cover.
close the battery cover.
Insérez le bloc-pile avec les bornes de
Insert the battery pack with the terminal
contact vers l'intérieur de l'imprimante .
Insert the battery pack with the terminal
side toward the printer.
side toward the printer.
Pour retirer le bloc-pile,
3
To remove the battery, press the
appuyez sur le levier gris pour
3
To remove the battery, press the
gray hook to unlock it, then hold
le déverrouiller, puis saisissez la
gray hook to unlock it, then hold
the handle and pull out the
poignée et sortez le bloc-pile de
the handle and pull out the
battery.
l'imprimante .
battery.
* Veillez à mettre l'imprimante hors tension avant de retirer ou de remettre
* Be sure to turn the power off before removing or replacing the battery
* Be sure to turn the power off before removing or replacing the battery
en place le bloc-pile.
pack.
pack.
Lorsque l'imprimante est mise hors tension, le témoin ÉTAT s'éteint
When the power is off, the STATUS LED turns off (see "Power OFF" on
When the power is off, the STATUS LED turns off (see "Power OFF" on
(voyez Mise hors tension de l'imprimante). Ne retirez pas le bloc-pile
page 22). Do not remove the battery pack until this light turns off.
page 22). Do not remove the battery pack until this light turns off.
avant que le témoin s'éteigne.
Make sure to check that the STATUS LED has turned off before
Make sure to check that the STATUS LED has turned off before
Assurez-vous que le témoin ÉTAT soit éteint avant de retirer le bloc-pile.
removing the battery pack.
removing the battery pack.
* Veuillez prendre note que le retrait du bloc-pile peut prévenir
* Note that removing the battery pack by the operation above may
* Note that removing the battery pack by the operation above may
l'actualisation des données dans la mémoire de l'imprimante.
prevent updating the information in the printer memory.
prevent updating the information in the printer memory.
Poignée
Handle
Handle
Levier
Bornes de contact
Bloc-pile
Battery pack
Hook
45
4
Terminal
15
15