Displaying The Setting Information; Setting And Displaying The Current Time - Samsung PPM42M7HB - 42" Plasma Panel Owner's Instructions Manual

BN68-01304A-00Eng

Displaying the Setting Information

You can view the setting status you select by pressing the "INFO"
button on the remote control.

Setting and Displaying the Current Time

You can set the PDP Display's clock so that the current time is
displayed by pressing the "INFO" button. You must also set the
time if you wish to use the automatic on or off timers.
1
Press the MENU (
Result:
e
Press the ... or † button to select Setup.
2
Result:
3
Press the ENTER (
Press the ... or † button to select Time.
4
Press the ENTER (
Result:
5
Press the ENTER (
Press the œ or √ button to select Hour or Minute.
6
Set these by pressing the ... or † button.
➢
7
Press the ENTER (
8
Press the EXIT button to exit.
➢
In the event of a power interruption or the set being turned off at
the supply, the settings for the Clock will be lost.
6/25/07 11:34 AM
) button.
The main menu is displayed.
The Setup menu is displayed.
) button.
) button.
The Clock Set is selected.
) button again.
You can set the hour and minute directly by pressing
the numeric buttons on the remote control.
) button.
Page 33
AV
Picture : Dynamic
Sound : Custom
SRS TS XT : Off
-- : --
Setup
Time
Language : English
PC
Move Enter Return
Time
Clock Set 12: 00
On Timer 12: 00 Off
Off Timer 12: 00 Off
Move Enter Return
Clock Set
Hour Minute
12 00
Move Adjust Return
English - 33