Asus P5SD2-X - Motherboard - ATX Installation Manual page 102

2. When the Level item is highlighted, use the up/down arrow key to select the
RAID set that you want to create.
[Create New RAID]
Name : JRAID
Level: 0-Stripe
Disks: Select Disk
Block: 128 KB
Size : 319 GB
3. When the Disks item is highlighted, use the up/down arrow key to highlight
an HDD that you want to belong to the RAID set, then press the space bar to
confirm selection. Repeat the process until the HDDs are selected.
A selected HDD shows a
[Hard Disk Drive List]
HDD0: HDS722516VLSA80
HDD1: HDS722516DLA380
4. Key in the RAID volume capacity. Use the up/down arrow to choose the block
size. The default value indicates the maximum allowed capacity.
3-14
Confirm Creation
Model Name
[Create New RAID]
Name : JRAID
Level: 0-Stripe
Disks: Select Disk
Block: 128 KB
Size : 319 GB
Confirm Creation
[Create New RAID]
Name : JRAID
Level: 1-Mirror
Disks: Select Disk
Block: N/A
Size : 159 GB
Confirm Creation
sign before it.
Capacity
XXX GB
XXX GB
Type/Status
Non-RAID
Non-RAID
Chapter 3: Software support