Setting Up The Printer To Fax; Step 1: Connect The Printer To The Telephone Line - Lexmark Pinnacle Pro901 Fax Manual

Setting up the printer to fax

Step 1: Connect the printer to the telephone line

Check the scenarios below and follow the setup that is applicable to your telephone service.
Scenario 1: Standard telephone line
Setup 1: Printer is connected to a dedicated fax line
To connect:
Connect the cable from the wall jack to the
Tips for this setup:
•
You can set the printer to receive faxes automatically (Auto Answer On) or manually (Auto Answer Off).
•
If you want to receive faxes automatically (Auto Answer On), then set the printer to pick up on any number of
rings that you want.
port of the printer.
Setting up the printer to fax
5