Media Source Enumeration; Disable Face-Up Reverse Page Order; Ignore Application Collation - Kyocera TASKalfa 820 User Manual

Device Settings

Media Source Enumeration

Setting Media Sources
1
2
3

Disable Face-Up Reverse Page Order

Ignore Application Collation

Selecting Printer Driver Collation
1
2
2-14
Media source enumeration supports compatibility for media source values
unique to the printer driver, such as those for cassettes or feeders. Your newly
installed printer driver maintains identical media source support with the driver it
replaces, whether for this driver or one from another manufacturer. If media
source macros exist for the older driver, then the alignment of media source
values maintains support without the need to change the macros.
Use the Driver Info utility (\Utility\Driver Info\DrvInfo.exe), available on the
Product Library CD, to compare the source values for all installed drivers.
If the values for a given media source differ between printer drivers, you can
reassign an enumerated value to create a match between the drivers.
In the Device Settings tab, select Compatibility.
From the Media source enumeration list, select the paper supply method. The
current value is listed in the Enumerated value box.
Type an Enumerated value for the media source, and click Apply. To align
settings with a different driver, this value should align with those in the other
driver.
You can restore all the options in Compatibility Settings to the default by
clicking Reset.
With Disable face-up reverse page order selected, the face-up job produces
the first page on top and the last page on the bottom.
With the check box selected, face-up reverse page order is disabled.
With the check box cleared, the default reverse page order is enabled.
This option bypasses the Collate setting in software applications, and gives
priority to the printer driver setting.
• With the check box selected, the printer driver Collate setting is used.
• With the check box cleared, the application Collate setting is used.
You can ignore the collation setting in the application and use the printer driver
collation setting.
In the Device Settings tab, select Compatibility.
Select Ignore application collation.
You can restore all the options in Compatibility Settings to the default by
clicking Reset.
User Guide