Requested Time; Date; Enlarge / Reduce; Media Type - Kyocera TASKalfa 2420w Operation Manual

NOTE: Unified Accounting
Unified Accounting will centralize all your accounting information to the IPS. To enable this feature
see the INI Configuration section.

Requested Time

Users can select a job be printed at a certain time for scheduling of printing. This feature needs to
be turned on in the Request.ini file. Set the entry IgnonreTime= to False, this will tell the software not
to ignore the time associated with the job ticket and schedule the job to print at the specified time.

Date

Users can select a job be printed at a certain date (see Requested Time above)

Enlarge / Reduce

User can select a preconfigured zoom percentage, or key in a percentage from 5% to 360%. If
FORCE SIZE is selected, the FORCE SIZE MENU opens.

Media Type

This field allows the selection of the type of media the job is to be printed on. Types include bond,
vellum, and film (Mylar). Applying the "On Hold" media type will place the job in the queue but will
not print until a valid media type is applied by the queue Manager. Other media types can be
configured as noted in the INI Configuration section.

Pen Table

This field displays the Pen Table that will be applied to vector files as they are selected. Pull down the
menu to select a different Pen Table. Click the Pens button to make changes within the selected
Pen Table.
This information is solely for use of Personnel and Authorized Dealers. No part of this publication may be copied, reproduced or
distributed in any form without express written permission from.
Request Operators Guide
2011.
- 22 -