Collation; Printing Collated Documents; Ecoprint - Kyocera TASKalfa 820 User Manual

Collation

Printing Collated Documents

1
2
3
4

EcoPrint

KX Driver
Flip on short edge
Collate increases print speed to specify the order in which the pages of a
multi-copy job are printed. With Collate selected, the print job's data is rendered
as page images in the printing system's memory after it has been downloaded
the first time. The remaining job copies are printed from this stored data,
bypassing the process of sending down the job's data from the computer to the
printing system with every copy.
With Collate selected, the driver prints the complete job set by set. With Collate
cleared, it prints each page by set. For example, with Collate selected, three
copies of a five-page document outputs as pages one through five in
succession, three times. The driver graphics image displays the grouping of
collating and non-collating pages.
When printing multiple copies of a multipage document, the printer can
assemble the pages of each copy in numerical order.
In your application, open the Print dialog box and click Properties.
Select the Collate check box.
Type or select the number of complete sets in the Number of copies box.
When printing using the collate option, specify the number of copies to print.
The document page count must not exceed the printer tray capacity.
Click OK to return to the Print dialog box, and click OK to begin printing.
EcoPrint makes the entire image, text and graphics, appear lighter in the
printed job. EcoPrint does not increase print speed.
Basic
4-5