Kyocera TASKalfa 8000i Driver Manual page 92

Enable client profile
accessed by clients in a client/server environment. This feature in the Advanced tab
lets an administrator control and distribute profiles.
Fast printing
F
Finishing edge
sizes in a document. For example, the long edge of an A4 page is aligned with the
short edge of an A3 page; or the short edge of a letter size page is aligned with the
short edge of a legal size page. Finishing edge can be used with or without the staple
feature.
Full bleed
margins by printing to a larger sized-paper than the original, and then letting you trim
the edges.
GDI compatible mode
G
reproduces what is viewed on the screen using the Microsoft Graphical Device
Interface (GDI) component to render the document. It generates data in a raster
printing format, creating a larger printable file.
Gutter
by scaling down text and graphics. This supports stapling and hole punching. When
used with Duplex printing, the enlarged blank space lines up evenly on both sides of
the sheet. The larger blank space is created by shifting the printable area to the right
or down as much as one inch (25.4 mm).
H Halftone screen
experienced user can adjust Halftone screen settings to create shades of gray in
graphic images. Larger dots spaced close together create darker shades, and smaller
dots spaced farther apart create lighter shades. Shading can be varied by adjusting
the number of rows of dots, the angle at which rows of dots are placed, and the shape
of the dots.
Job accounting
J
pages printed by each account ID. Account IDs can be assigned at the printing system
and stored in the driver. After account IDs are assigned, you can use the Job
accounting option to print in the Job accounting mode.
Job name
print the job from the printing system's operation panel. When you send a print job
using one of the Job storage (e-MPS) options, you can assign a custom name to the
job or use the name of the application file.
Job storage
printing later. You also have the option of protecting the print job from unauthorized
printing by using an access code. This feature is available when a hard disk is installed
and selected in Device Settings.
Media source enumeration
M
compatibility for cassettes and feeders between old drivers and new drivers or when
moving from one manufacturer to another. Compatibility creates a smooth transition
for environments using macros or PRESCRIBE commands to access cassettes and
feeders.
ii
Client profile refers to profile settings saved on a server and
Printing mode that decreases spool size and increases print speed.
Finishing edge aligns the matching sides of two different page
Layout feature that lets you produce full-page printing without any
A page description language option that accurately
Blank space on the left side or top of a printed page that can be increased
Imaging process that breaks down an image into dots. An
An accounting system that records and controls the number of
A Job name is a unique identifier for each print job, to help you find and
Job option that stores a print job permanently on a hard disk for
A Device Settings option that maintains
User Guide