Connection
Before starting the connection, turn off the power of the devices to be connected.
Check and prepare the required devices and cables for connection.
Note:
• Since the connector storage
section does not have a suffi-
cient space, use a LAN cable
that does not exceed the sizes
described in the illustrations.
z
Connect a LAN cable (category 5 or better,
straight) between a PoE device (such as a
hub) and the network connector of the cam-
era.
Important:
• Use all 4 pairs (8 pins) of the LAN cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
• When disconnecting the LAN cable once, reconnect the cable after around 2 seconds. When
the cable is quickly connected, the power may not be supplied from the PoE device.
18
9 mm
{11/32
Example of LAN cable
connector
Network connector
}
inches