Chapter 1 Introduction
Back Panel
8
10
11
Internet Port
12
DC Connector
7
Router Switch
Switches router mode between enabled, disabled, and auto.
On:
Off:
Auto:
7
8
LAN LED (Green)
On:
Flashing: An Ethernet device is communicating.
9
9
LAN Port
Connect your computer, hub, or other Ethernet devices to
these ports. This switching hub supports 10 Mbps and 100
Mbps connections.
10
Internet LED (Green)
11
On:
Flashing: The Internet port is transmitting data.
12
Connect your cable or DSL modem to this port. 10 Mbps and 100 Mbps
connections are supported. In bridge/AP mode (router switch off ), the
Internet port becomes a regular LAN port, for a total of 5 usable LAN ports.
Connect the included AC adapter.
Router is enabled (router mode).
Router is disabled (bridge/AP mode).
This switches between modes automatically based
on whether or not another router is detected on the
Internet port. The default setting for this switch is
Auto.
An Ethernet device is connected.
The Internet (WAN) port is connected.
- 7 -