Buffalo AirStation NFINITI High Power WHR-300HP User Manual page 45

Chapter 4 Configuration
Parameter
Broadcast SSID
Allow multiple SSIDs
Use Single SSID
SSID1
SSID2
SSID3
Separate
SSID
Wireless Authentication
Meaning
If [Allow] is checked, then the AirStation will respond to SSID
searches from wireless devices by broadcasting its SSID. If [Allow] is
unchecked, then the AirStation ignore SSID searches from wireless
devices.
Clicking [Allow multiple SSIDs] will enable Multi Security, allowing
the use of multiple SSIDs, each with different wireless security
settings. Clicking [Use Single SSID] will disable Multi Security.
The AirStation will then allow one SSID and one type of wireless
security.
Note: When using Multi Security, enable at least one of the following:
SSID1, SSID2, or SSID3.
Multi Security SSID1 can use WPA-PSK-TKIP or WPA/WPA2-Mixed for
wireless security.
Multi Security SSID2 can use WPA-PSK-AES for wireless security.
Multi Security SSID3 can use WEP for wireless security.
When [Use] is checked, wireless devices connected to the AirStation
can communicate only with the Internet side, not with each other.
SSIDs may contain 1-32 alphanumeric characters.
Choose an authentication method for wireless connections.
- 44 -