Buffalo AirStation NFINITI High Power WHR-300HP User Manual page 32

Chapter 4 Configuration
Parameter
PPPoE Connection No.
Preferred Connections
Meaning
Click [Edit Connection List] to display.
Name of Connection
Enter a name to identify the connection. You may enter up to 32
alphanumerical characters and symbols.
Username
Enter the username specified by your provider for PPPoE. You may
enter up to 64 alphanumerical characters and symbols.
Password
Enter the password specified by your provider for PPPoE. You may
enter up to 64 alphanumerical characters and symbols.
Service Name
Fill in this field only when your provider specifies a Service Name.
Leave blank otherwise. You may enter up to 64 alphanumerical
characters and symbols.
Connection Type
Specifies the timing for the AirStation to connect to your provider.
Automatic Disconnection
Set time to disconnect after communication is stopped when the
connection method is set to [Connection on Demand] or [Manual].
You can enter up to 1440 minutes.
Authorization
Configure an authorization method with a provider.
MTU Size
Configure the MTU value between 578 and 1492 bytes.
MRU Size
Configure the MRU (Maximum Receive Unit) value between 578
and 1492 bytes.
Keep Alive
If Keep Alive is enabled, the AirStation issues LCP echo requests
to maintain the connection with the PPPoE server once a minute.
If the server does not respond after 6 minutes, then the line is
considered disconnected and the AirStation will terminate the
connection. If your PPPoE connection is often disconnected,
disable Keep Alive.
Displays connections that you've added to the preferred connection
list.
- 31 -