Overheat (Oh)/Fan Fail Led; Power Fail Led - Supermicro Supero X8DAH+-F User Manual

Overheat (OH)/Fan Fail LED

Connect an LED cable to the Front
UID and OH/Fan Fail connections on
pins 7 and 8 of JF1 to provide ad-
vanced warnings for chassis overheat/
fan failure. Refer to the table on the
right for pin definitions.

Power Fail LED

The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
definitions.
A
OH/Fan Fail LED
X8DAH+
Rev. 2.01
B
2-23
Chapter 2: Installation
OH/Fan Fail LED
Pin Definitions (JF1)
Pin# Definition
7 Vcc
8 OH/Fan Fail LED
OH/Fan Fail Indicator
Status
State Definition
Off Normal
On Overheat
Flash- Fan Fail
ing
PWR Fail LED
Pin Definitions (JF1)
Pin# Definition
5 Vcc
6 Ground
A. OH/Fan Fail & UID LEDs
B. PWR Supply Fail
20 19
Ground
X
Power LED
HDD LED
NIC1 LED
NIC2 LED
PWR Fail LED
Ground
Ground
2
NMI
X
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
Reset
Reset Button
Power Button
PWR
1