Expansion Slots
•
Three PCI-E 2.0 x8 slots (Slot 1/Slot 3/Slot7)
•
Two PCI-E 2.0 x16 slots (Slot 2/Slot 6)
•
One PCI-E 2.0 x4 (in x8) slots (Slot 5)
•
One PCI-E 2.0 x8 (in x16) slots (Slot 4)
BIOS
•
32 Mb AMI SPI Flash ROM
•
PCI 2.2, ACPI 1.0/2.0/3.0, Plug and Play (PnP), DMI 2.3, USB Keyboard sup-
port, and SMBIOS 2.3
PC Health Monitoring
•
Onboard voltage monitors for CPU0 Vcore, CPU1 Vcore, 1.5V, 5V, 5VSB, 12V,
-12V, 3.3Vcc, 3.3VSB, VBAT and Vtt
•
Fan status monitor with firmware control
•
CPU/chassis temperature monitors
•
Platform Environment Control Interface (PECI) ready
•
Thermal Monitor 2 (TM2) support
•
CPU fan auto-off in sleep mode
•
CPU slow-down on temperature overheat
•
Pulse Width Modulation (PWM) Fan Control
•
CPU thermal trip support for processor protection, power LED
•
Power-up mode control for recovery from AC power loss
•
Auto-switching voltage regulator for CPU cores
•
System overheat/Fan Fail LED Indicator and control
•
Chassis intrusion detection
•
System resource alert via Supero Doctor III
ACPI Features
•
Slow blinking LED for suspend state indicator
•
Main switch override mechanism
•
ACPI Power Management
•
Keyboard Wakeup from Soft-off
Onboard I/O
•
Intel ICH10R supports six SATA2 ports (with RAID0, RAID1, RAID10, RAID5
supported in the Windows OS Environment, and RAID0, RAID1, RAID10 for
Linux Platforms) (Note 1)
•
Intel 82576 Gigabit Ethernet controllers supports Giga-bit LAN1/2 ports
1-7
Chapter 1: Introduction