Supermicro Supero X8DAH+-F User Manual page 35

RDIMM Population for the Motherboard w/5500 Processors Installed
DIMM DIMMs
Slots per Populated
Channel per Channel
3 1
3 1
3 2
3 2
3 3
Note: 1066 RDIMMs will run at 800 MHz (-BIOS automatic downgrading)
UDIMM Population for the Motherboard w/5500 Processors Installed
DIMM DIMMs
Slots per Populated
Channel per Channel
3 1
3 2
3 3
Memory Support for the Motherboard w/the 5600 CPU(s) Installed
•
1.5V DIMMs
1.5V RDIMM Population for the Motherboard w/5600 Processors Installed
DIMM DIMMs
Slots per Populated
Channel per Channel
3 1
3 1
3 2
3 2
3 3
Note 1: 1333 MHz RDIMMs will run at 1066 MHz (-BIOS automatic downgrading).
Note 2: 1333/1066 MHz RDIMMs will run at 800 MHz (-BIOS automatic downgrading).
Note 3: MIxing of 1.35V and 1.5V DIMMs is not recommended.
1.5V LRDIMM Population for the Motherboard w/5600 Processors
Installed (for X8DAH+-LR and X8DAH+-F-LR Only)
DIMM DIMMs
Slots per Populated
Channel per Channel
3 1
3 2
3 3
DIMM Type (Reg.=
Registered)
Reg. DDR3 ECC
Reg. DDR3 ECC
Reg. DDR3 ECC
Reg. DDR3 ECC
Reg. DDR3 ECC
DIMM Type (Unb.=
Unbuffered)
Unb. DDR3 ECC/Non-ECC
Unb. DDR3 ECC/Non-ECC
Not available
DIMM Type
(Reg.=Registered)
Reg. DDR3 ECC
Reg. DDR3 ECC
Reg. DDR3 ECC
Reg. DDR3 ECC
Reg. DDR3 ECC
DIMM Type Speeds (in MHz)
(LR= Load
Reduced)
LR DDR3 ECC 1066
LR DDR3 ECC 1066
LR DDR3 ECC 1066
2-11
Chapter 2: Installation
Speeds (in MHz) Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
800,1066,1333 SR or DR
800,1066 QR
800,1066 Mixing SR, DR
800 (Note) Mixing SR, DR, QR
800 (Note ) Mixing SR, DR
Speeds (in MHz)
800,1066,1333
800,1066
Not available
Speeds (in MHz) Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
800,1066,1333 SR or DR
800,1066 (Note 1) QR
800,1066, 1333 Mixing SR, DR
800 (Note 2) Mixing SR, DR, QR
800 (Note 2) Mixing SR, DR
Ranks per DIMM (QR=Quad
Rank, OR=Octal Rank)
QR or OR
QR or OR
QR
Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
SR or DR
Mixing SR, DR
Not available