Table of Contents
Advertisement
Sleep Time
Setting the Sleep Time reduces power consumption by turning off
the fuser inside the MFC, while it is idle. You can choose how long
the MFC is idle (from 00 to 99 minutes) before it goes into sleep
mode. The timer is automatically reset when the MFC receives a Fax
or PC data, or makes a copy. The default setting is 05 minutes. While
the MFC is in sleep mode, you will see Sleep on the LCD. If you try
to print or copy in sleep mode, there will be a short delay while the
fuser warms up to working temperature.
1
Menu
Press
2
Use the dial pad to enter the length of time the MFC is idle
before it goes into sleep mode (00 to 99).
3
Set
Press
.
4
Stop/Exit
Press
■
If you want to turn sleep mode off, press
Job Cancel
in Step 2.
■
If the MFC is in Sleep Mode when you change the Sleep
Time, the new setting will take effect the next time the MFC
copies, prints or is restarted.
Power Save
Setting Power Save mode reduces power consumption. If Power
Save Mode is switched On , when the MFC is idle, it drops into power
save mode in approx. 10 minutes automatically. The MFC will not
display the date and time in this condition.
1
Menu
Press
2
Press
Off ).
3
Set
Press
4
Stop/Exit
Press
1
6
2
,
,
,
.
.
simultaneously and
1
6
3
,
,
,
.
or
to select On (or
when the screen displays your selection.
.
Secure
and
or
to select Off
Ecology
3.Power Save
GETTING STARTED 4 - 9
Advertisement
Table of Contents
