Brother DCP-J140W Basic User's Manual page 60

Level1 Level2
3.Network 3.WPS/AOSS
(Continued)
4.WPS w/PIN Code
5.WLAN Status
6.MAC Address
7.WLAN Enable
0.Network Reset
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.
50
Level3 Options
— —
— —
1.Status Active(11b)
Active(11g)
Active(11n)
AOSS Active
Connection Fail
—
2.Signal
—
3.SSID
—
4.Comm. Mode
— —
—
On
Off*
— —
Descriptions Page
You can easily configure
See
your wireless network
settings using the one-
button push method.
You can easily configure
your wireless network
settings using WPS with
a PIN code.
You can see the current
wireless network status.
You can see the current
wireless network signal
strength.
You can see the current
SSID.
You can see the current
Communication Mode.
You can see your
machine's MAC address
from the control panel.
Lets you use the wireless
network connection.
Restore all network
settings to the factory
settings.
.