2. Do the following, as necessary, to work with the selected scan area:
• If the marquee is correct, continue with the next step.
• To move the marquee, click inside the scan area and drag the marquee where you want it.
• To resize the scan area, place your cursor over the edge or corner of the marquee, then click and
drag the edges where you want them. (Hold down the Shift key as you resize the marquee to
retain the same width/height proportions.)
• To create additional marquees (up to 50, if available), click the
existing marquee and paste it on the preview image.
• To delete a marquee, click the marquee, then click the
3. Click inside each scan area and make any necessary settings in the EPSON Scan window.
Parent topic:
Available Image Adjustments - Office Mode
You can select these Image Adjustments options in EPSON Scan Office Mode.
Note: Select the Image Option checkbox if you need to set any of the grayed-out image adjustments.
Not all adjustment settings may be available, depending on the Image Type setting.
Unsharp Mask
Makes the edges of certain image areas clearer. Turn off this option to leave softer edges.
Scanning in Office Mode
Delete Marquee icon.
93
Copy Marquee icon to copy the