Epson WF-2532 Start Here

WF-2532
Start Here
Read these instructions before using your product.
1
Unpack
Note: The included ink cartridges must be used for printer setup
and are not for resale. For more detailed information, visit
www.latin.epson.com/infocartucho (website available only in Spanish).
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials, including from inside the printer.
2
Turn on
1
Connect the power cord to the back of the printer and to an
electrical outlet.
Caution: Do not connect to your computer yet.
2
Press the power button.
3
Select settings
1
To select English as your language, press
select it, then press OK.
If you want to change the language, press
select it, then press OK.
2
Select your country/region and press OK.
3
Select Summer if Daylight Saving Time is in effect;
otherwise, select Winter. Press OK.
4
Select the date format and press OK.
5
Press the number keys to enter the date and press OK.
6
Select the time format (12h or 24h) and press OK.
7
Press the number keys to enter the time. Then press
or to select AM or PM, if necessary.
8
Press OK.
Note: You can change the date and time settings using the printer's
control panel. For more information, see the on-screen User's Guide.
4

Install ink cartridges

Caution: Keep ink cartridges out of the reach of children and don't
drink the ink.
Note: The ink cartridges included with your printer have a lower
yield due to the ink system charging process. This process is carried
out the first time you turn on your printer and guarantees better
performance.
1
Lift up the scanner unit.
2
Shake the ink cartridges gently 4 or 5 times, then unpack
them.
Caution: Don't touch the green chip or small window on any
cartridge.
or to
or to